Centramatic Wheel Balancers

Tell ’em you saw it on RoadTraveler.net

Become a RoadTraveler patron. Thanks!

James Langan

Copyright James Langan/RoadTraveler. All Rights Reserved

Resource:

Centramatic

 

 

Timbren DRTT3500E Spring Kit

On Dec. 23, 2019, I installed the firmer Timbren Industries single-convoluted springs, replacing the DR2500D double spring I ran for six months. I needed to reuse the bracket from the double-spring kit because there was a packaging mistake with my order.

However the springs, mounting brackets, and included Timbren spacers are interchangeable, just the spring mounts are different heights for this application. Received the correct and taller DRTT3500E mounting bracket and did the R&R. Without a 1-inch spacer the new setup is 3/4-inch taller overall.

Slides: 1) Shows the new set up on the left and what I’ve been running for three weeks on the right. 2) What I was running installed 3) What I’m running now, which is the traditional DRTT3500E spring mount/kit, without the optional spacer.

Tell ‘em you saw it on RoadTraveler.net.

James Langan

Copyright James Langan/RoadTraveler. All Rights Reserved

Resource:

Timbren

 

Timbren SES Single-Convoluted DRTT3500E first look

Timbren Single-Convoluted Aeon spring

Timbren’s SES (Suspension Enhancement Systems) severe-service, single-convoluted Aeon rubber springs were an excellent upgrade on my 2017 Ram/Cummins 2500 Hallmark flatbed camper outfit.

The double-convoluted version I have been running for six months worked well, but the shorter and firmer single-convoluted spring is a better fit for my application. Not stiff or jarring, but more supportive and less squishy. Combined with other recent upgrades, my camper outfit drives fantastically.

Tell ‘em you saw it on RoadTraveler.net.

James Langan

Copyright James Langan/RoadTraveler. All Rights Reserved

Resource:

Timbren

 

 

Toyo Open Country R/T Diesel Wear Review

One of the first camping trips with the new R/Ts where they saw light dirt, rocks, a little mud, and much low psi crawling.

Toyo Open Country R/T Tires

Toyo Tires’ rugged terrain R/T got the nod to be the first traction tread on my 2017 Ram regular cab. The versatility of a 60/40 design is ideal for my many miles both on- and off-highway. The R/T has had my attention since its introduction, but there was extra allure once it was offered in my favorite, niche, 18-inch size, the 285/75R18. Hearsay reports indicated that it was extremely quiet on-road, but I needed to experience this for myself.

Toyo’s Rugged Terrain R/T

Features And Benefits include:

-High Turn-Up, 3-Ply Polyester Sidewall Construction: Contributes to excellent durability, impact resistance, and handling.

-Optimized Pattern Arrangement: Reduces noise for improved driving comfort.

-Aggressive Sidewall Designs With Durable Sidewall Compound: Enhances traction and side impact protection and offers two slightly different sidewall tread designs for owner preference.

-Open, Scalloped Shoulder Blocks: Improves off-road traction; enhances grip in muddy, sandy, or snowy off-road conditions; and ejects mud and snow through the open channels.

-Stone And Mud Ejectors: Forces stones and mud from the grooves.

The R/T offers a choice of sidewall shoulder tread design.

Mount, Balance, and Baseline

Five tires were ordered to ensure I had a spare that was not only the proper size but also offered adequate traction, which can be important when the spare is needed in difficult terrain. The new rubber balanced without drama on OEM aluminum wheels, typical for Toyo’s multi-segment designs.

One would think that the R/T’s outer lugs would lead to more noise compared to the familiar A/T II Xtreme. My initial run on the R/Ts had me thinking they were maybe slightly louder. However, when I put the A/T II Xtremes back on, and drove over the same section of freeway, I could not tell a difference. My back-to-back evaluations corroborated other reports that say the R/T is extremely quiet and sometimes indistinguishable from the A/T II Xtreme. Quite an engineering accomplishment! At most there may be a slightly different pitch to the noise they make and how they sound at lower speeds. To be perfectly clear, the R/T is not a silent tread design—get a highway tire if you want that—but they are impressively quiet for their appearance, void, and target audience.

Toyo A/T II Xtreme on the left, and Toyo R/T on the right. Both are LT285/75R18E and can support 4,080-lbs each at 80 psi.

Because I am a stickler for drivability, I was happy to discover that the Toyo R/T construction and design mated perfectly to my 2017 Pack Mule, which still sports the factory caster and camber settings; only the toe has been adjusted. There were no unusual handling or tracking quirks that required me to seek alignment or suspension adjustments. On level and smooth roadways no steering input correction was necessary. The truck continued straight and remained neutral, even when I played the old game: look mom, no-hands.

Some treads and chassis, even identical sizes from the same manufacturer, mesh differently. It is worth noting that the same size Toyo A/T II Xtreme drift to the right a bit on the ’17 Mule, yet they track perfectly straight on the 2014 Carryall crew cab that sports an SPC offset ball joint.

The guys at the tire shop must hate seeing me drive up.
Static, single-plane spin balancing in my preference.
Nearly 100 lbs of Toyo traction tire and OEM forged aluminum wheel needed a mere 3-ounces.

General Use And Wear Data

Over several months these Rugged Terrain treads saw at least a little of most surfaces. That means much pavement, but also plenty of dirt, gravel, snow, slush, and a little ice. The R/T is not a dedicated winter tire. It does okay, though maybe not quite as good as the familiar Toyo A/T II, which offers much more siping. The R/Ts have spent as little time as possible crossing mud…I don’t care for it, and heavy trucks and campers often flounder in mud.

Modern turbo-diesel pickups (not just Rams) often wear tread quickly compared to their gas-powered cousins. This has much to do with the massive amount of twist that the engines apply to the ground, and in this case the ‘Mule’s constant GVWR load. Manual transmissions are compounding factors, and both my Fourth Generation Ram/Cummins 2500s have the G56 6-speed (which I love). My driving style is generally smooth and efficient; however, there are times when I intentionally smash the accelerator, run the Cummins up-to the redline, and/or drive at higher speeds for hours. Therefore my tire wear data may represent a slightly fast wear scenario.

34.84-inches tall inflated according to Toyo, and about what I measured.

All LT-metric R/T sizes come with 16.4/32” of tread depth. This is 0.6” less than the same size Toyo A/T II, and the starting depth affects how many miles one might get out of tires before needing replacements. I prefer more rubber for both traction and longevity, but the 16.4/32” seems to be just enough. All floatation sizes start with 18.9/32-inches. Over 8,650 miles, rotating four, using a rearward cross pattern, these 285/75R18 Toyo R/T have delivered 1,965 miles per 1/32” of tread. This is similar to other tires that have yielded up to 2,100 miles per thirty-second. Wear often slows down as tread becomes shallower (if tires are rotated), and the measurements become more accurate as well.

Recently I mounted a different set of meats for a new evaluation, but the R/Ts remain in my shop mounted, balanced, and ready for continued use. Tire prices vary throughout North America, but in my part of the West the LT285/75R18E Toyo R/T are $340 each at my local Discount Tire.

16.4/32” of tread depth on all LT-metric Toyo R/Ts.
New tires looking good at the fuel pumps.

Tell ‘em you saw it on RoadTraveler.net.

James Langan

Copyright James Langan/RoadTraveler. All Rights Reserved

Resource: Toyo Tires

 

 

 

BD Diesel Performance Throttle Sensitivity Booster and Button Kit

James Langan

Copyright James Langan/RoadTraveler All Rights Reserved

Resource:  BD Diesel Performance