Big Willy Jeep

The Big Willy, a super-sized jeep with rear steering.

The Big Willy is twice the size of an original WWII Willys. This is not just a lifted 4WD, but also a wild, drivable, super-sized creation that includes a ladder on the rear to facilitate entry. Details include rear-steering, Dana 60 axles, 52” tires, and a Cummins R2.8 engine. Owner, fabricator, and builder Ian Liljeblad displayed Big Willy’s largeness at the Burning Man festival immediately after completion, where is was shown sans clothes (of course) in bare metal. For SEMA it received an appropriate, olive drab wrapper. MASSIVE.

Cummins R2.8 Turbo Diesel Big Willy engine.
Thankfully Mr. Ian Liljeblad does not believe that ridiculously huge wheels are ‘required’ to be cool.

James Langan

Copyright James Langan/RoadTraveler All Rights Reserved 

 

 

 

 

Elongator Tailgate

Elongator Tailgate

The SEMA Show’s size makes it difficult to visit all the booths I have on my list, let alone discover or pay attention to new and interesting things that one might otherwise wiz past. I had glanced at but dismissed the Elongator booth the first time I walked by, thinking the product was just another unimpressive bed-slide or extender. I took a closer look the next day and was impressed.

Elongator calls their replacement tailgate, the “Swiss Army Knife” of tailgates, which is an appropriate description. This replacement tailgate system is installed or removed as easily as any modern factory tailgate. When closed it fits snugly to the rear of the bed just like the factory piece. The Elongator can be opened and used like a traditional tailgate, but using the tools contained within is what it’s really about.

Elongator tailgate system

After opening, extending the initial top plate of the Elongator lengthens the tailgate about 20”. The gate and extension are on the same plane, and the extension is designed to handle an impressive 850-pound load. Sliding a robust, full-width pin allows the extension to pivot toward the ground at a 28-degree angle. Two aluminum ramps contained inside the Elongator can be removed and hooked into the end of the extension, completing a ground-up ramp for loading motorcycles, ATVs, lawnmowers, or almost anything. There are several slots for the ramps, allowing the owner to choose the appropriate placement.

Extension opened
Latched Elongator with fiberglass rear skin

Obvious differences when viewed from the rear include the Elongator name, and a fiberglass skin instead of metal. When closed, it fits snug against the bed, and nothing rattles. The introductory price is about $2,800, depending on options, which I don’t consider expensive for the utility provided. The warranty is three years. As a guy who routinely uses my truck to haul things, I can envision getting much use out of an Elongator.

Copyright James Langan/RoadTraveler

All Rights Reserved.

Resource: Elongator

Warn M8274-70 winch

70th Anniversary Warn M8274-70 Winch

Warn is arguably the most known, respected, and legendary name in the aftermarket four-wheel-drive world. From manual-locking-hubs, winches, bumpers, recovery gear, and more, they have now been building for 70-years. Warn introduced several new products at SEMA in 2018; my favorite is their new M8274-70 winch.

Even those less familiar with four-wheel-drive stuff can spot the traditional, upright design of Warn’s iconic 8274 winch. This legendary self-recovery winch has been a familiar sight on the front bumper of countless Jeeps and old-school Dodge trucks from the Mopar before Mopar Was Cool days or yore. The 8274 has a reputation for speed, reliability, being underrated, while offering 150′ of winch line. There are substantial cosmetic upgrades to the 70th anniversary winch, but Warn did much more than add bling.

Using the 6-horsepower motor from their 9.5xp model, the rated capacity increased from 8,000 pounds to 10,000 pounds. They made a fast winch 25% faster at full-load. It is now the fastest winch under load that Warn has ever made. A Waterproof Albright contactor replaces solenoids for increased reliability and efficiency, and there are other internal upgrades. This is a bitchin’ piece of gear. Guess what; they’re not giving them away.

The existing 8274-50 model was already one of Warn’s more expensive (and best) winches, the current street price is $2,000. The Made-in-USA 8274-70 is limited to 999 units worldwide, and the retail price is $3,200! At the time of the SEMA Show, Warn had already received orders for over one-third of the run. I’m interested, but none of my rigs have bumpers that would accept an upright winch like the 8274… maybe I need a new diesel Jeep JL with a 3.0L EcoDiesel?

Copyright James Langan/RoadTraveler

All Rights Reserved.

Resource:  Warn Industries

 

 

 

Factor 55 LDP Load Distribution Plate

Another great new winching product from Factor 55, the LDP, Load Distribution Plate, a multiple-load collection point.

Copyright James Langan/RoadTraveler

All Rights Reserved.

Resource:

Factor 55

 

Cooper Tires AT3 tire family

Cooper Tires’ Scott Jamieson, Director of Product Management, gives us the rundown on the new AT3 4S, LT, and XLT designs at the 2018 SEMA Show.

Copyright James Langan/RoadTraveler

All Rights Reserved.

Resource:

Cooper Tires

 

Cummins Powered Dodge Power Wagon

This is the Full Metal Jacket, or FMJ, a 1941 Dodge Power Wagon with a Cummins Turbo Diesel (4BT) under the hood, backed by a TH350 transmission. It was built by Weaver Customs in Utah.

Enjoyed a quick look at this beauty near the end of the 2018 SEMA Show.

Copyright James Langan/RoadTraveler

All Rights Reserved.

Resource:

Weaver Customs

 

 

 

 

 

 

 

Big Ass Fans AirEye Pedestal Fan

For years I’ve been casually looking for a good fan for my shop. There are many inexpensive ones, from under $100 to a several hundred, but less than a handful that look like they would last long or work well.

At the 2018 SEMA Show I found the Big Ass Fans display near closing time on Thursday. This particular fan, the AirEye Pedestal Fan, is $900 shipped (you assemble), and has a seven year warranty! I was impressed.

This Lexington, Kentucky, company also makes large industrial fans, like the one above in my video, which has a 15 year warranty (if I remember correctly).

Copyright James Langan/RoadTraveler

All Rights Reserved.

Resource:

Big Ass Fans